Sunday, December 11, 2011

Wipers feature

  First, the characteristics of boneless wiper
     1 boneless wiper with curved glass fit tight, even by force, scraping to pay carbon coated to ensure grab quieter, smoother, cleaner.
     2, the use of aerodynamic design, high-speed driving, smear will not be air lifted to ensure scraping swab clearer.
     3, optimized wiper design in the middle of the flat wide, with a shade anti-aging effect.
     4, with no skeleton floating steel structure, to eliminate motion shaking. Long life, light weight, strong adhesion than conventional wipers.
     5, spring rubber and covered both ozone and UV resistant rubber ability to adapt to different climatic conditions.
     Second, the installation method
     1, the standard interface design, easy installation, no need to replace the wiper arm, directly replaced.
     2, remove the old wiper, the wiper wear.
     3, if there is oil on the windshield, wax, dirt and other foreign matter, clean after the first treatment used.
     Third, the wiper use and maintenance guide
     ● Remove the windshield wiper sunny day with dust on the surface, be sure to spray the glass of water, not dry scrape.
     ● glass on the other stubborn, hard dirt, should clean up by hand. These things are easy to make wiper blades were injured, leading wiper scraping clean. Serious, wiper motor
 Also be affected.
     ● washing and daily cleaning wiper films need to lift, run to get wiper blades to the "back", when put gently back, what will not be popping the wiper blade bounce.
     ● winter use, should be used to clean the windshield ice scraper ice surface, ballast, so as not to increase the wiper of the burden.
     Fourth, the size before buying to be sure
     Please Buyers carefully before using their own cars wiper size, to avoid trouble.
     Fifth, the small data
     Wiper-inch units and metric units were: 14 "- 350mm 16" - 400mm 18 "- 450mm 20" - 500mm 21 "- 525mm 22" - 550mm 24 "- 600mm 26" - 650mm

No comments:

Post a Comment