Flight control system to reduce fatigue

Cruise control system or the English name for SpeedControlSystem CrusieControlSystem, which is a fatigue reducing device drivers.

When the car in long-distance highway driving, you can start the cruise control system automatically car fixed at a specific speed, eliminating the long foot pedal drivers suffer. At the same time, it can in the state of the pre-cruise speed for acceleration and deceleration of the regulation.

In the 1960s the United States, the cruise control system has been widely used in the car, the current domestic production of some high-end cars such as the Passat, Accord, are also equipped with cruise control.

In addition, the cruise control system also save fuel and reduce emissions benefits, because the car has a corresponding economic rate, when the driver set the cruise control system adjust the speed in the economy can play a role in fuel-efficient.

Specifically, this cruise control system Cruise, cruise speed, cruise deceleration functions.

● Cruise

The control lever switch to ON, you can at 40 km / h over any speed, press (SET / ACC) button for 1 second to set cruise speed, cruise into the state (no throttle, the vehicle can press set cruise speed).

● cruising speed

In cruise mode, each press (SET / ACC) button for half a second to increase the speed of 1 km. Can also hold down the (SET / ACC) key, the speed will automatically improve slowly, until the appropriate speed and then release the button. In addition, cruise control state can step on the gas to accelerate, release the throttle when, the speed will slowly return to the previously set cruise speed.

● cruise deceleration

In cruise mode, each press (RES / DEC) key for half a second to reduce the speed of 1 km. Also has been holding down (RES / DEC) key, the speed will automatically slow down, speed up for re-release it.

● constant speed lifting

In cruise mode, gently depress the brake, you can lift the fixed speed.

● fixed speed recovery

After the lifting of constant speed, simply hold down (RES / DEC) key for one second, do not step on the gas, the speed can be automatically restored to the constant speed cruise speed before lifting.